Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

$40.00
- Easy-to-read 3.0" gauge - AutoHead™ with ball inflator accessories - Aluminum barrel and plastic base - 160psi rating
$12.00
Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters
$25.00
• Water resistant • Durable plastic • Fits most bikes
Engineered to be seen day and night, the incredible sleek Hotrod™ Front 110 emits a powerful 110 lumens of wide beam brilliance. Its continuous array of white LEDs penetrate broad daylight and the dark roads at night with powerful flashes and an extra-wide radiant glow. Every bit the road cyclist’s light, it uses a low-profile flexible mount designed for most handlebars including aerobars. - Powerful 110 lumen white light with 6 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (High - Low - SteadyPulse® - Low Flash - DayLightning® - Zoom) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - Continuous array of LEDs work in unison to illuminate an extra-wide and powerful glow - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Ultra low profile, water-resistant design only weighs 29 grams - Versatite™ flexible mount conveniently attaches to most handlebars including aero bars RUN TIMES: - Low Steady: 100 hrs - High Steady: 1:30 hrs - Low Flash: 30 hrs - DayLightning®: 3:30 hrs - SteadyPulse®: 6 hrs - Zoom: 6 hrs - CHARGE TIME: 3 hrs - MOUNTING: Flexible mount for seat post/seat stay - BATTERY: Built-in Li-ion - SYSTEM WEIGHT: 29g *Features and specs are subject to change without notice.
$20.00
- Convenient storage for any bike with elegant space-saving design - Welded construction with padded wheel hook - Maximum load: 40lbs
$34.99
- Made from heat-treated tool steel to ensure the ultimate in strength and lasting performance. - Ergonomic, cushioned grip, and high leverage design for comfort and ease of use. - Quickly and cleanly cuts brake and derailleur cables, housing, and other wires. Cable cutters are an essential tool used for some of the most fundamental elements on the bicycle. What seems like a simple tool can often be the root of frustration when poor cut quality ruins a brand new cable, crimps housing shut, or leaves strands uncut. The Pedro's Cable Cutter is an industry favorite and when put to the test against the competition and you will quickly see why. Our cable cutter is designed for years of service, for comfortable and easy usage, and with extra jaw overlap ensuring a clean cut every time. The Cable Cutter is designed for cutting steel cables (wire rope) up to 4mm in diameter. Backed by Pedro's lifetime warranty.
$20.00
- UniClip accessory mount system allows mounting both the fender and taillight at the same time for optimal visibility while riding. - Quickly mount design; no tools required. - Uniclip saddle mount included.
$2.00 - $3.00
Our Sport Hydration Drink Mix was created for a simple purpose—to replace the electrolytes lost in sweat and to provide a little bit of energy when working out, without offending your palate or gut. We initially created this drink because some of the world's best athletes needed better. Conventional sports drinks made them sick. They were undrinkable—too sweet, over-flavored, and didn't even replace what was lost in sweat—which defeated the whole purpose, like fighting thirst with more thirst. The best athletes needed something to safely hydrate, something to quench their thirst, and something to help them perform better. So with their help, we reimagined sports drinks, stripping down what used to be a neon-colored carnival to its bare essentials. In the process, we learned that simple wasn't just better for elite athletes, it was better for everyone who works hard and sweats. The result is a sports drink with minimal sugar (4g per 100 ml) and a ratio of sugar (glucose + fructose) that is optimized for faster absorption, an electrolyte profile that actually matches what is lost in sweat (800 mg sodium, 80 mg potassium, 100 mg calcium, and 80 mg of magnesium per liter), and only real fruit for flavor for a light and refreshing taste that you can drink all day. That's it—less sugar, the right electrolyte profile, and real fruit. So, if you've never met a sports drink you wanted to take home, your luck is about to change. Drink when thirsty and leaking like a busted fire hydrant. Don't drink while deep in the middle of a Netflix marathon session or sending emails (unless, you're also on your trainer). Meaning, if you haven't earned it, you don't deserve it.
$15.00
The X-Mount series securely holds any phone with any case and offers a minimalist profile. - Proprietary stretch materials grip your phone on all 4 corners
$40.00
Kool-Stop Bike Pajamas are fabricated from durable polypropylene and weaved with a special iron thread to make them extra tough. - Helps protect bike from weather and dust - Ripstop Plastic Bicycle Cover for Outdoor Protection - Folds quickly and easily for compact storage - Covers one bike - Dimensions: 80 x 40
$5.00
• Vinyl coated hooks • 9 mm diameter • Black
$20.00
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - For bikes without factory mounting plate (includes top plate and bolt) - 285mm (for bikes 22" and under) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Royal Blood mineral oil is a specially formulated, low viscosity hydraulic fluid that ensures consistent performance of Magura brakes. - Doesn't absorb water - Lubricates entire braking system
$39.99
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.
$15.30
- Premium red formula all-purpose bicycle grease
$4.00
Wheel magnet for all CatEye cycle computers
$11.00
Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.
$6.00
• Vinyl-coated • 2-pc set • Wood Thread
$64.99
The Garmin XL Combo mount is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer and GoPro compatible cameras & lights, specifically designed to accommodate the EDGE 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-EDGE provides free replacement inserts, as needed. - CNC Machined 6061 T6 Aluminum - Compatibility: 31.8mm and 35mm diameter handlebars - New clamp design is hinged for ease of installation - Supported Computers: Garmin Edge 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Camera Interface: GoPro style interface for compatible action cameras or lights
$45.00
The Drive Thru is a dummy hub or chain keeper that replaces your wheel while cleaning the chain. It is a fast and effective way to clean your chain between races or in your garage. It allows you to fully rotate your cranks and shift through your complete range of gears while protecting the frame. It installs simply with one hand, and is quick and easy to change between bikes. The Drive Thru is also great for packing the bike for transport.  - Note: This product is thread pitch dependent. You must order the same thread pitch as the thru-axle in your bike. - Dummy axle is precision-machined from 7075 aluminum and knurled for easy grip. - Pulley is machined from durable Delrin. - Oil and solvent-resistant O-ring - Lead-in threads designed for quick insertion into the frame - No tools required, simple, one-hand installation - Weight: 62 grams
$30.00
- Thumb control keeps thumb safe from cold air - Ergonomic design ensures accurate valve pressure - Simple push-on feature activates air cartridge - Includes 1, 16g threaded CO2 cartridge - Presta and Schrader valve compatible system - Compatible with threaded and non-threaded cartridges
$7.50
An easy to attach mount that allows you to clip your Recon TL to any compatible Giant helmet.
$38.00
Giant's Numen+ Spark Headlight boasts 16 bright white LED lights that are sure to catch the attention of others on the road. It produces 80 lumens and features 5 different modes. A rubber strap makes it easy to mount and charging is just as simple, just plug it in with a micro-USB cable.
$120.00
Specifications & Features: - 8/10 security rating - 14mm hardened MAX-PERFORMANCE STEEL SHACKLE - 3 STAINLESS STEEL KEYS — including new key design and one LED REPLACEABLE KEY FOB - Patent-pending HARDENED DOUBLE DEADBOLT design gives additional protection against twist attacks - NEW SMALLER CROSSBAR DESIGN - HIGHER SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Protective vinyl coating - Key Safe Program - Product dimensions: 4” x 9” (10.2cm x 22.9cm) - Product weight: 3.50 lbs. (1.59kgs)
$50.00 - $60.00
- Powder-coated steel construction - Rubber carrying handle - Quick-release handlebar-mounting system for 22.2mm and 31.8mm handlebars
$12.00 - $15.00
Made of solid brass, this bell’s melodic sound is full and old-fashioned. Big and brassy, the perfect accompaniment for cruisers, comfort, and town bikes. - Dome Diameter: 51mm (2") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
$60.00
A sturdy handlebar-mounted metal basket for shopping trips, quick jaunts around town. New QuickClick Handlebar Mount (Fixer 3e) allows installation on eBikes to make attachment and removal a breeze. - Capacity: 16L/975 Ci - Weight: 1370G/3.02 Lb - Size: 35x26x25cm/13.8”x10.2”x9.8” - Attachment: QuickClick Handlebar Mount (Fixer 3e) Fits 25.4mm and 31.8mm handlebars (shims included)
$15.00
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.