Accessories

This 23-piece Wheels Mfg. drift set is used to install 10mm and larger inside diameter sealed bearings, using a press with 3/8" diameter rod - Includes open bore and over axle drifts for 6802, 6901, 6902, 6903, 6000, and 6001 bearings - 10mm ID hole, for use with Wheels Manufacturing PRESS-1 or PRESS-4 bearing press handles

Wheels Manufacturing Sealed Bearing Extractor - 15mm Fits the following bearings: - 6002 - 6702 - 6802 - 6902 - 15267 - 15268

- Made in U.S.A. (Maysville, KY) - Dimensions: 20.5 x 13 inches - Extended handlebar clamps are 2" apart, allow greater clearance for shift and brake cables, and fit 7/8", 1", and 1 1/4" diameter handlebars - Legs extend from 13 3/4" to 21 1/4" and have two mounting holes for mounting to either the axle or fork eyelets for bikes with quick release front hubs - Powder Coat Finish - Complete rack with fittings weighs 6.0 lbs.

Available in white (3339WH) and gloss black (3339GB) powder coat finishes - Made in U.S.A. (Maysville, KY) - Dimensions: 14.5 x 9.5 x 9 inches (1.25-inch rail on all sides - Two-piece adjustable legs extend from 14" to 22" and mount to either front axle or fork eyelets on bikes with quick release front hubs - Extended handlebar clamps allow greater clearance for shift and brake cables - Handlebar clamps are enlarged to fit 1 1/4", 1" or 7/8" OD handlebars - Rack is furnished with metric fasteners - Combo comes with a Wald 3133 quick release basket (dimensions: 14.5 x 9.5 x 9 inches; tapering to 12.25 x 7 inches) - Basket nests in the rack and locks into place - Lift the handle to release the basket and take it with you - Complete rack and basket combo weighs 4.8 lbs. each

Topeak's BabySeat II rear rack allows you to easily mount your BabySeat II (sold separately) to your 29er. This tubular aluminum rack features tabs that clear most rear disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger.

A sturdy handlebar-mounted metal basket for shopping trips, quick jaunts around town. New QuickClick Handlebar Mount (Fixer 3e) allows installation on eBikes to make attachment and removal a breeze. - Capacity: 16L/975 Ci - Weight: 1370G/3.02 Lb - Size: 35x26x25cm/13.8”x10.2”x9.8” - Attachment: QuickClick Handlebar Mount (Fixer 3e) Fits 25.4mm and 31.8mm handlebars (shims included)

Need more carrying capacity for running errands? Then check out Topeak's Rear Basket. It easily attaches to a Topeak QuickTrack rear rack (sold separately) and holds groceries, work clothes and anything else you need to transport. And, its handle makes it extremely portable.

Topeak's MTX TrunkBag DXP boasts a pop-up main compartment and expandable side panniers so it's capable of carrying plenty of gear. Plus it's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, bottle holder, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately).

Topeak's RX TrunkBag DXP boasts a pop-up main compartment and expandable side panniers so it's capable of carrying plenty of gear. It's built to last with rigid molded panels mated to 600-denier polyester. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. Plus, Topeak's ingenious RX System makes it a snap to attach it to your Topeak RX QuickTrack rack (sold separately).

Aethon provides full coverage protection with a cutting edge sport design that is perfect for those in need of performance eyewear. It is equipped with a removable brow bar for a customizable look and feel. - Made of Grilamid TR-90, a homopolyamide nylon characterized by an extremely high alternative bending strength, low density, and high resistance to chemical and UV damage. - Hydrophilic rubber ear and nose pieces for a no-slip fit. - Adjustable ear and nose pieces for a customizable, comfortable fit. - Vented lenses improve air circulation, prevent fogging.

Sleek angles and premium materials define Alliant as a performance sunglass for cyclists, runners, and endurance athletes. Vented lenses improve airflow while the adjustable ear and nose pads of hydrophilic rubber increase grip as you sweat ensuring a perfect, stable fit. - Made of Grilamid TR-90, a homopolyamide nylon characterized by an extremely high alternative bending strength, low density, and high resistance to chemical and UV damage. - Hydrophilic rubber ear and nose pieces for a no-slip fit. - Adjustable ear and nose pieces for a customizable, comfortable fit. - Vented lenses improve air circulation, prevent fogging.

Get ready to go the distance in Kilo! Kilo’s lightweight Grilamid TR-90 Frame provides all-day comfort with hydrophilic adjustable rubber ear and nosepieces that offer a no-slip grip. The polycarbonate lenses are shatterproof with vented lenses, making Kilo in Black / White with a Clarion Red Fototec lens an ideal choice for endurance sports like cycling or running. - Frame: Light & Durable Grilamid TR-90 - Lens: Clarion Red Fototec – Shatterproof polycarbonate lens that repels water with a tint that starts nearly clear and darkens in sunlight to a smoke tint with red mirror - Features: Vented lenses, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Medium-Large | Weight: 31G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Take on any trail in Rail Matte Black. Rail takes the need for ventilation in cycling glasses and combines it with an oversized rimless design that offers increased coverage. Its frame is lightweight for all-day comfort and the shatterproof lenses ensure long-term use. Rail's rimless shield keeps eyes protected from debris while still offering maximum airflow, whether you're pedaling the blacktop or trailing under the pines.

Rail Race takes the iconic Rail sunglasses to new heights, specifically tailored for cycling and baseball enthusiasts. Building upon the success of the original Rail, Rail Race is a 2-lens interchange model that combines style and performance to elevate your outdoor experience.

Rivet provides full coverage protection with cutting edge design. It's frame is extremely light weight with nose and earpieces that are adjustable for a custom fit. Rivet in Crystal Smoke is equipped with Enliven lenses that fine tune the wavelengths of light that matter most; making greens, blues, and reds pop with definition.

Sledge Lite in Matte Black takes all the performance of Sledge and packs it into a streamlined, lighter design. The oversized ergonomic face-fit features three vented lens options that provide maximum coverage with adjustable temples. Sledge Lite caters to comfort and drives performance. Slay in Sledge Lite. - Frame: Light & Durable Grilamid TR-90 - Lens: Clarion Red Fototec – Shatterproof polycarbonate lens that repels water with a tint that starts nearly clear and darkens in sunlight to a smoke tint with red mirror - Features: Vented lenses, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Medium-XL | Weight: 35.5G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Slay in Sledge. Oversized styling provides maximum coverage and an ergonomic face-fit. Featuring three vented lens options and adjustable temples, Sledge caters to comfort and drives performance. - Frame: Light & Durable Grilamid TR-90 - Lens: Clarion Yellow / AC Red / Clear – Shatterproof polycarbonate interchange lenses for bright and low light scenarios - Features: Vented lenses, fully adjustable ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Medium-Large | Weight: 37G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Slay in Sledge. Sledge caters to comfort and drives performance. The oversized styling provides maximum coverage and an ergonomic face-fit. This Sledge in Matte Black features a Clarion Red Fototec vented lens that adjusts tint depending on surrounding light conditions. - Frame: Light & Durable Grilamid TR-90 - Lens: Clarion Red Fototec – Shatterproof polycarbonate lens that repels water with a tint that starts nearly clear and darkens in sunlight to a smoke tint with red mirror - Features: Vented lenses, fully adjustable ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Medium-Large | Weight: 37G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Ideal for daily essentials, about-town errands, and weekend tours, Thule's Pack 'n Pedal Tour Rack is a quick and easy solution for almost every bike, from fully rigid hybrids to full suspension mountain bikes. The unique attachment system secures to your bike in a flash, and fits on either your fork or your seat stays. Once attached, it's silent, secure, and safe for any frame material. The Tour Rack includes side rails so you can mount panniers to increase your carrying capacity.

- Powder-coated steel construction - Rubber carrying handle - Quick-release handlebar-mounting system for 22.2mm and 31.8mm handlebars

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

- 12mm hardened performance steel shackle - New hardened double deadbolt design with anti-rotation to resist against twist attacks - Disc style cylinder with center keyway - Includes side-mount snap-in bracket - Includes 4' flex cable for securing front wheel or other accessories - Includes 2 stainless steel keys with an ergonomic design to reduce torque and keep them from bending or breaking - Key Safe Program - Product dimensions: 4” x 8” (10.2cm x 20.3cm) - Product weight: 2.40 lbs (1.09 kgs)

The Garmin XL Combo mount is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer and GoPro compatible cameras & lights, specifically designed to accommodate the EDGE 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-EDGE provides free replacement inserts, as needed. - CNC Machined 6061 T6 Aluminum - Compatibility: 31.8mm and 35mm diameter handlebars - New clamp design is hinged for ease of installation - Supported Computers: Garmin Edge 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Camera Interface: GoPro style interface for compatible action cameras or lights

Cage: - Improved reinforced composite material - Redesigned cage bracket Tool: - Nylon reinforced composite storage box - Chromium-vanadium steel body - Clutch 9: 2, 2.5, 3, 4, 5, 6, and 8mm hex; T25 and flat-head screwdriver

RIDE FREE Ditch the heavy pack and saggy saddlebag with the all-new Clutch Crank Storage. Lightweight and right there when you need it with six allens, a chain tool, and a spoke wrench, the Clutch Crank Storage can solve just about any trail-side mechanical. FEATURES: - The smallest multi-function crank-stored tool on the market - Magnetic locking system ensures quiet, stable storage - Quickly and easily mounts in hollow crank spindle - Compatible with hollow-spindle SRAM, Shimano, and Praxis cranks - Includes 2.5 to 6mm allens, a T25 Torx, a valve core remover, spare chain links, and a spoke wrench SPECIFICATIONS: - Tools: 2.5, 3, 4, 5, 6mm Hex, T25, Chain breaker, Spare chain links storage, Spoke wrench - System: Compatible with Sram & Shimano & Praxis Cranks - Sizes: 100x 32 x 19mm (TBC) - Weight: 84g - Material: High-density plastic

- Conduct accessory mounts allow clean integration of handlebar accessories with the Conduct Brake System - Will fit all GoPro and Garmin models (Including 1000) Kit includes: - Universal light adapter (x1) - GoPro mount adapter (x1) - Computer mount adapter (x1) - Giant computer mount tray (x1) - Garmin computer mount tray (x1) - Computer mount disc plate (x2) - Stem bolts and washers

- Easy-to-read 2.5" gauge - Steel barrel and base - Ergonomic sweeping handle with ball inflation accessory storage - AutoHead™ with metal accents and pressure release button - 160psi rating

Available in 3 liter, 4 liter and 4.5 liter sizes the H2Pro Frame Bag is designed to store bulky items within the bike frame without altering the bike’s center of gravity or handling characteristics. Constructed with our all-new H2Tex three-layer waterproof fabric and a high-quality water and dust proof zipper, the H2Pro Frame Bag features a hidden port that allows you discrete access to the bag for charging batteries or connecting to a hydration bag. - Giant-exclusive H2Tex 3-layer waterproof material - Hidden port design, perfect for charging cables or hydration hoses - Interior storage pocket helps keep contents organized an in place - High-Quality water/dust proof zipper SPECIFICATIONS - Material: H2Tex three-layer waterproof fabric - Colors: Black - Size: 43.5 x 6 x 11.5cm (3L), 46.5 x 6 x 13cm (4L), 50 x 6 x 14 cm (XL) - Volume: 3L, 4L, 4.5L

The H2Pro Handlebar Bag has dual roll closures and an air bleed valve, allowing you compact and flexible storage capacity. With a three-point attachment fastening system, designed to securely stabilize the pack in the center of the cockpit as well as eliminate abrasion issues, the H2Pro Handlebar Bag also has a headlight attachment, reflective strips to increase visibility as well as an extension attachment for the H2Pro Accessory Bag. FEATURES - Dual roll closure and an air bleed valve to assist with compression provide flexible packing and adjustable capacity - Three point attachment for maximum stability - Light attachment mount and reflective design for added safety - Compatible with H2Pro Accessory Bag SPECIFICATIONS - Cover material: H2Tex three-layer waterproof fabric - Dry Bag material: 210D Nylon with PTU Film - Colors: Black - Size: 48 x 24cm Max (M), 55 x 27cm Max (L) - Volume: 9L (M), 12.5L (L)

- Includes everything for a quick fix while on or off-road - Giant seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool